Unfortunately, we do not have any installation/tuning instructions for these carbs just yet.
Some quick tips for the XS Performance Assembled Carb Kits are listed below.
- The pink tubes are overflow tubes so do not hook these up to any fuel lines, fittings, etc.
- A trick we have found is to screw the idle screw all the way in and bring it 2 1/2 turns OUT.
Then, it is just fine-tuning from there. The extra jets are supplied if needed.
- The float setting is simply parallel with the float bowl if you want to check this before installation.
Unfortunately, these are not vacuum-synced carbs.
These carbs should be synced by a professional mechanic.