Revival Parts

Thanks for reaching out. The 2 spacers are to move the caliper more towards the center of the wheel and line up with the shallower full floater disc. ...

Typically, you will find the following bore sizes: 1/2" on the bikes with a single caliper that has a single-piston. 14mm on the mid-size bikes w...

Thanks for reaching out. Unfortunately, we do not have these lines sourced out by motorcycle. We recommend gathering the measurements from your existin...

Unfortunately, we do not have any direct replacement carbs for your model. Please visit our universal options to see what is right for you. Please rea...

Thanks for reaching out.  You must check the resistance of the coils you are replacing to ensure a correct match. Never select a coil with a lower resis...

The standard engine oil is usually suitable with the Big Bore kits. The Wiseco big-bore kits are higher compression, which means the engine will run a litt...

Thanks for reaching out. We do have a gasket set available below. It will fit 1980-1984 Models with purchase of: (3) 18-0673 3-Hole Tappet Cover Gask...

Thanks for reaching out.  When new, the shock length for the 1974 - 1984 XS650s is 12 3/4" (325mm). Thank you for your inquiry,

Unfortunately, we do not stock a direct replacement muffler for your specific model. However, we do have a wide variety of universal options linked below. ...

Thanks for reaching out.  While we do not have any sets made particularly for those models, you may be able to find a match, using the dimensions fro...