Revival Parts

The regulator/rectifier unit of the XS Charge PMA system is wired as such: Connect the green wire from the regulator pigtail to a chassis ground. Conne...

Thanks for reaching out. Our XS Charge PMA/Electronic Ignition kit is an easy and reliable upgrade from the old, stock TCI ignition system found on the late...

Thanks for reaching out. Our XS Charge PMA/Electronic Ignition kit is an easy and reliable upgrade from the old, stock ignition system. https://www.mike...

Hello, The XS Performance Camshaft kit is a very popular design that customers have bought for street use and racing use. The XS Performance Camshaft ki...

Thanks for reaching out. Sure thing! These are links to the jets you will need. Simply select the # jet and the quantity and add it to the cart. ...

Thanks for reaching out. Unfortunately, we do not carry any all-inclusive rebuild kit for our XS Performance Carbs. Below is a link to all of the replac...

Unfortunately, we do not have any installation/tuning instructions for these carbs just yet. Some quick tips for the XS Performance Assembled Carb Kits are...

Please see attached for a photo of the lacing pattern. Lacing Pattern Outer Spokes (90 degrees) are BLUE and go to the LEFT. [every 5th hole] Inn...

Thanks for reaching out. The differences between the replacement XS650 cam chains we offer are listed below. 52-4048 is preferred for racing applicatio...

If the float level is correct, the distance between the upper-most edge of the floats & the flange of the mixing chamber body will be: